刷机有风险
根据链接：http://www.dd-wrt.com/phpBB2/vie ... 017f434036d64af6317
内容：
First, Sorry to bump an old thread but google'ing "Buffalo 600D DD-WRT WAN" pops this post up as the first link (currently anyhow).
So, I want to say Thank you to JSpace for the process steps of doing a full factory reset. This helped my reset to continue testing.
-Back Story-
Recently got a WHR-600N to replace a current buffalo router that is acting up and possibly having a slow death. First thing I did was grab the latest beta (26138). Upon flashing, the diagnostic light goes solid part way through firmware flash and stays on until reboot, which the router then boot-loops. 30/30/30 and the router will stay up but Diagnostics light stays solid. Most functions work but WAN refuses to pick up an IP from the DHCP.
Here is what I have found. Any beta will work up until 24461 (24461 works). I tested 25251 and the WAN port / Lan settings seem to have severe issues, during reboot the WAN will act as a LAN port and the PC can pick an IP address from the next level up. Extremely odd. Even setting a manual IP address would not yield any connectivity.
If you are on the Stock WHR-600D firmware, flash to DD-WRT using the firmware-XX.bin and once you are on DD-WRT you can use the webflash.bin file.
基本上可以确定日版机器需要刷24461 JP版本的DD-WRT。
固件下载地址：点击下载
如果下载不了，良品店的顾客可以向客服索取。
刷机方法，页面直刷即可（管理设定----更新）。
注意事项：
1、不推荐高版本的DD-WRT，因为老外都测试了。
2、官方原版的2.4G和5G区域均为日本的，所以部分网卡可能需要手动配置信道才能搜索到2个信号。一般网卡支持1-11信道和36信道。刷DD-WRT以后就没有这个问题。
3、高版本的DD-WRT WAN可能有问题。
|
/1 
