ASUS RT-AC5300和RT-AC88U设置链路聚合

222ba · 发表于 2017-10-25 09:40:55

您需要登录才可以下载或查看，没有账号？注册WIFIHELL

x

[Teaming Port] How to setup link aggregation on RT-AC88U/RT-AC5300

(The steps below show the ASUS RT-AC88U router as an example)

Device environment setting:

Devices setting:

NAS :

1. NAS lan port 1 connected to RT-AC88U lan port 1, so as lan port 2

2. Open NAS's trunking function

i. Enable 802.3ad (LACP)

ii. Config LACP as Layer 2 (xmit policy). RT-AC88U doesn't support Layer 2+3 or Layer 3+4.

iii. Check GUI of trunking device (e.g : 2000 Mbps in Synology NAS)

3. NAS setting done

RT-AC88U :

1. Open teaming port function in RT-AC88U

[LAN]>[Switch Control] >[Bonding/ Link Aggregation]>(Enable)

2. Check NAS IP address by network map (NAS ip is 192.168.117)

RT-AC88U setting is done

		自动登录	找回密码
密码			注册WIFIHELL

[RT-AC5300] ASUS RT-AC5300和RT-AC88U设置链路聚合