WIFIHELL - 科技改变生活

 找回密码
 注册WIFIHELL

QQ登录

只需一步,快速开始

开启左侧

[RUCKUS通用] How to enable client isolation on stand alone AP

[复制链接]
222ba 发表于 2018-11-8 13:37:19 | 显示全部楼层 |阅读模式

注册WIFIHELL,浏览更多技术贴!

您需要 登录 才可以下载或查看,没有帐号?注册WIFIHELL

x
How to enable client isolation on stand alone AP

SummaryWants to enable client isolation on stand alone AP,where we can restrict access between clients connecting to a single WLANQuestionHow to enable client isolation on stand alone APCustomer EnvironmentStand alone APResolutionExecute following commands from CLI of AP

- Log into ssh of AP CLI using Putty

- Run command 'get ap-bridge <wlan name>'

- If wlan AP-bridge mode is Enabled

- Run command 'set ap-bridge <wlan name> disable '




Note : Disabling AP-bridge mode will isolate the clients connecting to a particular WLAN where commands are executed.



WIFIHELL | 万丰乐活 2019开启新的征程,好货不断! 【------帖子内部分资料可能出现链接失效,可联系店铺客服代为处理。】
关闭

站点推荐上一条 /1 下一条

万丰乐活

GMT+8, 2020-3-30 03:00

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表